Cummins Insite is Cummins diagnostic Software.Cummins INSITE is a PC-based software application that provides quick and easy access to your engine's electronic performance information, which enables faster service turnaround times. INSITE helps to ensure accurate procedures and diagnosis and limit downtime, while increasing productivity and profits.Cummins INSITE software supplies engine information quickly, getting the inside details you need. No matter what kind of equipment you run, INSITE is the one support product to have in your virtual toolbox to fit every Cummins electronic engine.
Operating Systems Supported
Windows 2000 SP4
NOTE: Windows XP x64 and Windows Vista 64-bit are not supported
English, Chinese (simplified), French, German, Italian, Japanese, Korean, Portuguese, Russian, Spanish, and Turkish
Cummins Inline 5 - Cummins Diagnostic Tool
Cummins Insite Function
1.Enhanced ECM security
2.Fault tree information
3.Audit trail information
4.Engine diagnostic tests
5.Accurate problem diagnosis
6.Trip and vehicle information
7.Parameter and feature adjustment
8.Fleet management/driver reward programs
9.Fault code and symptom-based diagnostics
10.Step-by-step trouble-shooting information
11.Complete wiring diagramsand sensor location maps
12.Tools to create templates for a group of vehicles
Attention:Cummins INSITE is offered in four functional levels: Basic, Lite, RSGR and Pro, ranging from a read only access level to full-function access and capability for the service professional.
Cummins Insite Features
1. Installation upgrade capability - upgrade from previous versions of INSITE™ 7.2, 7.3, 7.3 FP1, and 7.3 FP2
2. INLINE 4/5 drivers installation
The latest available INLINE 4/5 drivers will automatically be installed or upgraded with the installation of INSITE™ v7.4. Administrative rights are needed for the USB driver association after the installation.
3. INSITE Fault Viewer
INSITE™ Fault Viewer will be available for installation through INSITE™ DVD for all registered INSITE™ Pro Functionality users. INSITE™ Fault Viewer is designed to provide the ability to monitor public faults on a J1939 or J1708 network.The Fault Viewer will help to isolate the probable cause of a system failure or error. Administrative rights are needed for installation.
4.Operating System Support
Windows XP 64 bit, Vista 64-bit, Windows 7 32-bit and 64-bit are now supported. Windows 2000 is NO longer supported. See Operating System Support section below for more details.
New INSITE™ Base Features
1.Single key off for multi-module downloads
INSITE™ only requires a single key off at the end of a multi-module calibration download. All ECM Codes to be downloaded can be selected before the calibration download begins.
2. Ability to add Functionality Password when opening INSITE™ for the first time
INSITE™ now provides the capability to enter both the Basic and Functionality password the first time it is opened. This applies to a new installation. After entering the Basic password, a window will open asking for the Functionality password to be entered.
3. Export All Work Order
All Work Order images can be exported using the right-click menu and selecting the ‘Export All Images’ option.
4.Data Monitor/Logger Graphical Monitoring
Graphical Monitoring is a way to display, log, print, and save data for up to six parameters in a graph. Graphical Monitoring visually monitors and plots multiple parameters into a graphical display.
5.Adjustable Parameters Recovery File
If a calibration download fails when Save/Restore Adjustable Parameters is selected, INSITE™ will save these parameters to an Adjustable Parameter Recovery File. The file can be used by INSITE™ to restore the Dataplate and adjustable parameters on this ECM if it is in a ROM Booted or Foot Printed state on the next successful download.
NEW Engines Support
1.QSB 4.5/6.7 CM2250
2.QSL 9 CM2250
New ECM Diagnostic Tests
- Aftertreatment Diesel Exhaust Fluid System Leak Test
The Aftertreatment Diesel Exhaust Fluid System Leak Test is designed to command the dosing system to build and maintain prime regardless of the SCR inlet temperature. This test can be used to verify that the system is free of leaks after reassembly or to validate the repair of a faulty component in the dosing system. This only applies to ISC8.3 CM2250, ISL9 CM2250, ISB6.7 CM2250, ISF3.8 CM2220 AN, ISF2.8 CM2220 AN, and ISX 11.9/15 CM2250.
New Features and Parameters
- Transmission Driven PTO
Transmission Driven PTO has been developed to address issues found with excessive instability and intermittent PTO operation response on engine applications which run a PTO off the transmission tail shaft. The ECM will select the appropriate gain and stabilize the engine based on the user selected PTO Type. This only applies to ISX11.9/15 CM2250
COMPONENT REQUIREMENTS (for minimum performance)
Platform: IBM or 100% Compatible
Operating System: Supported: Windows XP SP2 or greater, Vista, and Windows 7 32- and 64-bit versions for all operating systems
Processor: XP - 500 MHz
Vista - 1 GHz
Windows 7 - 1 GHz
RAM Memory: XP - 512 MB
Vista - 1GB
Windows 7 - 2GB
Hard Drive: 2 GB available disk space
Media Device: DVD-ROM (may be internal or external as needed for installation)
Display: SVGA(1024 x 768 pixels) CRT
LCD: TFT Active Matrix, XGA (1024 x 768)
Keyboard: 101 Key Enhanced
Pointing Device: WindowsTM Compatible Device
Multimedia: Any Windows Compatible Sound Device
Other Software: Adobe Acrobat Reader v7.0 or higher
Microsoft .NET Framework v2.0
Printer: Windows Compatible Device
Internet connection: None
keyword : Cummins Insite, Cummins Insite software, Cummins Insite download, Cummins Insite manual, Cummins Insite program